3" lift lift springs for a zuk Trail gear 300.00 vs. Deaver 565.00. With out shipping for both. Trail gear any good?
I want to increase my lift from 6" suspension lift to 8" suspension lift and was wondering what I would need to get.... other than the leaf springs.
When I do kasi's axle swap to an 8.8 this summer I'm thinking for doing a spring over in the rear since the rear springs settled out so much, any words of wisdom?
Started out by putting the 6” lift on the front so that I could make sure with the stock axles in place everything lined up correctly. Started out laying all the pieces and parts out. Then took some “before” pictures. Used the...
Need as much info as I can on these. My TJ is getting ready to go into a big transformation over the next few months while I collect parts and I'm going to stretch the TJ and do coil overs but I don't know what lenght to get. I'm leaning twords...
As I'm going through my build I have been coming up with a bunch of questions on shocks. Especially regarding placement, angle and length. I'm mainly directing this towards leaf springs but not limiting to them. Through research the one thing...
Thinking about installing the revolvers on my 95 YJ with the Z-box's as well. Anybody have any experiance with them??
How the heck do ZJ / TJ / XJ front bumpstops stay put? :mad: I pulled the stock ones out, an am putting extended ones in. but can't figure out hos to make them stay. There's 3 little tabs around the cup where the poly piece goes. D I need to...
I'm looking for information on front shackle reversal. I've been searching and haven't found a whole 'this is what happens' thread. any input appreciated. I'm seeing: gives about 2" lift. you need longer shackles to compensate for pinion...
these are the links i am using for my rear four link suspension on the FrankinTuRD they are superbad!:twisted: http://www.suicidedoors.com/Square4-LinkBungwithSuperPivot.php the material that's going to be used will be 2x2 .25 wall ...
When I put the wagoneer springs on the front of my TuRD it gave me plenty of lift, however the wagoneer springs have an offset center pin so it caused my axle to be to far back and the 33inch tires would rub the fenders during flex, I researched...
Has anyone ever used these pivoting perches. I am thinking of making some of these for my EB. It looks like if you can build them strong enough it would work well. May have to add some traction bars to help with axle wrap though. Opinions???
http://hummerxclub.com/forum/viewtopic.php?t=3843 Guys what do you think of putting an airbag suspension on a 4x4 up here? This would be very cool, allow me more flex and a much better ride, plus the ability to lower for easy kiddy access then...
Ok I slightly understand spring rates but have a question. Going from a spring rate of 150 lbs to a spring rate of 180 lbs, how much would it effect the ride quality, offroad ability ie flexing and ability to keep tires on the ground? Can 30 lbs...
Well, Mousee did another awesome job! As part of my full-width axle swap, we ran into some steering issues. Thought we fixed those and ran into trackbar problems. Solution? 4-link the front! Here are some test pics. We maxed out our floor lift...
I need info on the 03 Dodge 1500 IFS front end. Ziggy and I are trying to help a guy out that has one with a unknow lift of around what we beleave is 5"-6". The CV shafts keep pulling apart. Anyone have information or know where I could find out...
looking to go a little taller on my Taco. I was just wondering what you guys think. I have 2 differant lifts in mind 5" tuff country and the 6" Fabtech. both are around the same amount of money $1400-$1800. What do you all think? does anyone...
I'm having a real problem finding what I want for Ladydurango's Dodge. I want to get it up high enough to fit 35 inch tires on it. It's not gonna be very good on a trail, but if I do it right it'll be fun in the mud. :allrighty: I want it to be able...
Gonna see if I can get pics and stuff when I do this first big build up to the WJ. Box 1 of 3 showed up today. Next weekend it looks like I'll be putting the lift on. If I can get it done Saturday, I might test it at the Sunday 55 mile. Here's a...
Ok looking for some advice for a friend that is out of the country. He has a 1994 dodge 1/2ton. he wants to put a lift on it to fit about 37's. He has 33's on it now. he mostly just wants to do some weekend wheeling. Nothing hard core at the...
I picked up a set of front XJ coils off the board. They are new 8.5 Rusty’s and I thought they where going to be way too big. I had 6-inch Skyjacker coils with 2" Polly coil spacers in there before. I swapped them out today in under then 1 hr. This...
Looking at 2 different lifts besides the BB for the WJ. Does anyone have experience, goods, bads, suggestions for these or possibly others. RE does not make one for my Jeep. Constructive critisizm only please. here is the link to the first one,...
At one point in my mass of on line searching I came across a write up on making your own control arms. As I skimmed past and told myself that I’ll need to remember this and look it up later. I now can’t fine crap about it. I need to order more tube...
Ok Need some opinions and such. What brands do you suggest? And where is a good place to get them. Don't say E-bay I don't buy off of there anymore. As soon as I get my shock mounts I'm going to get measuring to find out the lengths. Then I'm...
so here I am, with a little over 1 year on my 4" Procomp lift that isnt even all ProComp any more. I have Procomp 4" springs, R.E. rear shocks, trailmaster front shocks, ProComp front LCA's, Holeproof long arm rear LCA's, etc. With...
I need some help "turning" my torsion bars. Martin and I were discussing issues with the Monty lastnight. When I had the bumper and winch installed on the front of the truck, it lowered the nose an inch or two. I was told the torsion bars can be...
Does anyone know what the biggest size tires you can fit under a rubicon with a 2" lift? It comes stock with 31X10.50, most TJ's need a 2" lift just to get those under it. so i'm thinking that rubicon springs must be longer, which means if i put a...
I am trying to put stuff on my truck that obviously doesn't belong, the blocks center pin hole is too small and the shackles are too wide. Before I mount these and mess sometrhing up, can I use washers to fill in the gap between the mount and the...
I was curios, Jeepin Al mention something about twisting or adjusting torsion bars to lift the front of an IFS vehicle. He said something about doing this with the factory ones. How is this done? I want to see if I can lift the front of the Monty...
i have a 92 toyota with a 2in sus lift and 31x11.50 i would like to put a 6 inch lift and 35s but i cant find a 6in sus lift any were the biggest i can find is a 4 so, what is the best suspension package for a truck with ifs.............(ha i just...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
