Forum: General 4X4

http://www.youtube.com/watch?v=xRihRraT1Tw&feature=related i dont know what to say.

for my blazer I want some more ponies. I want to wheel with you guys, and I want to mud drag as well. I am in a tight decision making process RIGHT now. I have located a 454 big block in a truck for my blazer. this is EFI (fuel injected...

Petey, You cannot towbar a K-5. It's over 4000lbs and you would need to have the brakes hooked up to the tow vehicle to do it legally. Borrow a trailer, or drive it down.

If I find any and explore em a little and think it would make a sweet trail ride ill bring it to attention at the next meeting. I went to DNR today and asked about sr2477 trails in the borough. they sent me to:...

Long story short, after installing my OME lift, and the new tires I have the dreaded body mount rub that tends to plague lifted FJ's. The fix is to modify the body mount for clearance, but this requires someone who knows welding. I would like to...

The suzuki samurai made the #1 spot for FOUR WHEELER's beater files. Jeep Cherokee make #2, m1009 Blazer made #3, chevy m1008 made #4 and toyota pickups made #5! ALL of which are in our club! there is a list that goes to the top 10. :) ...

I was hoping to gather some ideas for my 87blazer. I would like to spin my tires FASTER through the mud. Ive contemplated an engine build, doubler kit, or engine modifications but I cannot do them all due to not being mr money bags. So my deal...

sorry its been a bit guys ive been internetless fora while. anyway, it turned out that my ramcharger had a clogged egr port, the entire thing in the manifold was plugged i had to chip it out. but it runs now, and im lookn to da a shakedown run if...

holy moly. that dodge diesel has some power. I wonder how it was built? :nerd: http://www.youtube.com/watch?v=cV0XJePUitI&feature=PlayList&p=74516D4D7A4ACE2C&playnext_from=PL&index=2&playnext=3 ---------- Post added at 09:17 am ----------...

CANCELED

OK.. I have some questions about the mud bogs... Where can I register? Does it cost anything to register? Does AO do sponsorships for member racers? In the event that the mud bogger winner wins, is there any cash prize? or prizes? I was...

I was going to just email kevin on this but I wanted to get more thoughts and ideas. I need to drop my blazer 2-3 inches to be "road legal" on my 8 inch leaf sprung k5 Blazer (solid axle). I remember kevin telling me that he removed a leaf...

Mud Boggs are this SATURDAY at North Pole Speedway. The pits look great! They have built 2 racing pits, recovery lanes, and a hill and hole run that looks like some sweeto muddy fun! They have built an anouncers and timers tower. They...

i got a 89 half ton suburban its nice rig i like it alot. well last night i was driving it and the rear end locked up and desinagrated and the driver tire and wheel and axel came off and my bumper slamed the ground. so i finely found out where my...

I need to someone to lend or sell me a code reader for a OBDII Thanks Josh

So I am going to start a new project now that my truck is operational. The plan is to build it for the next four years until I return to the states and I would like to race the KOH 2014. So this is going to be a long and drawn out process. I am...

so i just got done droppn the tank, cleaned the pickup tubes and presure washed the tank out, and the problem still aint fixed. i guess it gotta be the carb even thou its brand new, but it the only thiung i havnt changed yet

i think this would make a cute lil mud toy its the car off family matters. it would be cool to take a 4x4 four wheeler or something lil and cut and make it fit..

so i was wondering if anyone was free tommarow 2 help me put my tank back in my ramcharger and then go fora quick shakedown run on wainwrigth in the afternoon. it shouldnt take to long, took me 45 mins to drop the tank, tommarow i just gotta...

I do need to pick one up.. they are pretty cheap.....but I did not have one when I needed one today! I remember from an off road wheeler magazine article that someone wrote about using something other than a valve stem screw driver tool (that...

as i was coming home today i saw a brand new gate locking out the trail head to nenana trail .. I thought this was public access till the bottom where it borders native land ?

http://www.youtube.com/watch?v=mi8SlYGt0YM&feature=related

i have a suburban with a 6.2 it run great it has 36inch hummer tires but my biggest problem is its gutless, when u hit the mud it goes a lil and its like a brick wall and the engine cant spin the tires its like it just stops due to no power is there...

Well, seeing as I didn't have power steering anymore, and I have been going through PS pumps every 3 months, I thought I'd try some upgrades I found on Redneck Ram's website under the tech section. They drilled and made adjustments to the PS pump to...

Hello All!!! It's your AO Public Relations Rep here with an invitational announcement. The Lions are putting on an event to raise money for the March of Dimes. I encourage us all to give our support to the community, go out and have a good...

http://www.youtube.com/watch?v=EfsfwCRWHgo&feature=PlayList&p=FCF6B1791754CC7D&playnext_from=PL&playnext=2&index=40 http://www.youtube.com/watch?v=1XH8FPlRnko&feature=PlayList&p=FCF6B1791754CC7D&playnext_from=PL&playnext=4&index=42 ...

after two years of sittn, i finnally got my ranger to a place to do the motor swap. im aiming for next weekend, its the same motor going bback in it, shouldnt be to hard. anyone up to help? my number is 750 7323 if anyones up to it give me a call...

My winch controller shorted out on me so I went to go and order a new one. I discovered that they run from 100 - 150 plus shipping. :eek: So I decided to cut it apart and see how things work and if it is fixable. I started with cutting the body...

Today I have to dismantle the old Ford I brought home. I'm going to try to pull everything but the front axle in the garage. The front clip is coming off first thing this morning, then the engine, Trans, and T-case. The axles are what I am after...

I talked with Ren this morning. He got the permits needed to build a dedicated track behind the North Pole Speedway. The first races will be in early June.

Got a 3/4 ton trailer out of the DRMO sale yesterday, there are some more coming through this month as well. Got it for $297 after fees. I had a bunch of them on bid but forgot to check it at the end of the sale and only got one.

We're moving to Virginia this summer and making a grand road trip out of it. Taking the ferry then down the PCH and across the country from San Fransisco seeing all the sights along the way. I'm going to take 1 day along the trip for wheeling in a...

what size tire can i run on a ramcharger with stock axles, its an 84, and i assume its got a dana 44 up front no clue bout the back. i wana try to runs 35s with just a one inch body lift and lots of trimming. does that sound doable to you guys?

this is a sweet lookin truck i came across. it has like 2.5 tons front and rear and 54s looks like a well built rig.. i dont know all the specs but its pretty tall and neat looking.

I really wish we could buy these rigs in the States... This is me wheeling my rental car in Costa Rica just a few days ago. We wheeled the Jimny at altitudes exceeding 10,000 feet. It's safe to say that I had more problems at this...

Where can you get a "good" price for tow straps? AK rubber & rigging is 75.00 for a 2" by 20'.

Wheel bolt pattern for a 79 12bolt 5on? 2wd

http://www.youtube.com/watch?v=VbfE6tZAJrc&feature=related